PTFE Plastic Paste Extruder Machine
2.67 out of 5
(3 customer reviews)
- Long service life through solid workmanship and use of high quality components
- Low wall thickness tolerance through self-centering mandrel and special nozzle
- Measurement transducer like pressure, force and ram speed for permanent control of the extrusion process and extrusion speed
- Hydraulic closure with high closing force for quick loading of the extruder
- Special pre-form press with pre-form preparation device for multiple loading of the loading carriage i.e. extruder
- Electrically adjustable mandrel
- Measuring and controlling system for constant extruder speed
- Controlling system for constant speed of the extrudate
- User-friendly and maintenance-free system
- The paste extrusion systems are designed especially to costumers requests
- Automatic adjustment of the total system as well as recording of the formula
- Operating through touch screen and recording of the extrusion process parameters
Description
Features
- Adopt adjustable speed to accommodate pitch ,no need to change gear while operation;
- High productive efficiency ; production rate is three times higher than present usual machine per hour ,the max production reach to 98m/hour;
- Low noise ,transmission and pulling system adopt absorbing sound ,reducing shake and inserting equipment;
- Easy maintenance ,transmission flexible, structure easy install and remove.
- More friendly to environment: no PTFE powder splashing but powder output automatically
- Intelligent control : producing gaskets by controlling the power quantity
- More time saving : the power cut off automatically while the production number set up
- Longer working life : no heat while working.
- High quality components used.
Technical Specification
Paste Extruder | Type & Technical Data |
DX-D01 (suit for 25-60 lodaing cavity)
OD:2mm-6mm |
PTFE Paste extrusion Hose Main machine : 30KW power 380V 50Hz one key start with hydraulic drive.1.2M high for material load cavity.WorkBlank machine : 3KW with 380V 50Hz Hydraulic drive PTFE blank high with 300-600mm.
Furnace : 18KW 380V 50Hz with total high 8.5M 500 degree temperature. |
DX-100(suitable for 60-120 loading cavity)
OD:6MM-60MM -2 loading cavity |
FE Paste extrusion Hose Main machine : 30KW power 380V 40Hz one key start with hydraulic drive.1.5M high for material load cavity.
WorkBlank machine : 3KW with 300V 50Hz Hydraulic drive PTFE blank high with 300-600mm. |
3 reviews for PTFE Plastic Paste Extruder Machine
Add a review Cancel reply
Amelie –
I could not refrain from commenting. Exceptionally well written!
Here is my blog post … generic cialis 20mg
Zerwame –
what is viagra like[/url]
Zerwame –
order cialis[/url]