PTFE Industrial Nitrogen Sintering Furnace
With high insulating property,the temperature in the hearth is even, while the sintering curve, fixed time value and temperature value can be set up.The error of working temperature inside the hearth is at ±1 centigrade and there is no error within a period 1000hr of operation.. With the stainless steel-made hearth’s inner bag and turntable, they will not rust.The waste gas is discharged from the pipe after the purification by activated carbon, without pollution and with good environmental-friendly performance.
Description
Features as follows:
1.Single segment: There are only two mode of start-up heating and stop. The temperature inside the furnace can rise from normal state to designated state.
2.Multi-segment: 30 segments of different time and temperature can be programmed. The furnace can operate according to the temperature and time that have been set after being started up.
3.Multi-unit:16 segments of different time and temperature can be programmed. It is invoked according to designated products, The furnace can operate according to the temperature and time that have been set after being started up.
4.Proportion: Within effective output range, its actual heating output can change in series to keep even temperature inside the furnace.
5.Integration: Instrument and heating apparatus are controlled by high-low pressure electrical isolation of modern electronic technology to ensure the safe operation of apparatus and equipment.
6.Automation: Circular blower and turnplate can stop and operate at the designated temperature.
7.Memory: Each sintering record can be taken down and recorded date can last for 365 days. Data can be copied into computer for reading and archiving by U disk according to specific request.
Technical Data
| Chamber Size | 150 x 150 x 150 mm (6″x6″x6″) |
| Working Temperature | 400°C ( continuous ) |
| Maximum Temperature | 500°C |
| Temperature Control | 30 steps programmable and PID automatic control |
| Heating Rate | 0~15°C/min (suggestion: ≤10°C) |
| Temperature Accuracy | +/-1°C |
| Heating Element | Molybdenum Disilicide (MoSi2) |
| Working Voltage | AC 220V, Single Phase, 60/50 Hz (or according to your requirement) |
| Max. Power | 24 KW |
| Outside Size | 500 x 485 x 700mm |
| Wooden box size | 600 x 585 x 900mm |
| Net Weight | 95 Kg |
| Gross Weight | 120 Kg |
Brooks Neuse –
Wow that was strange. I just wrote an very long comment but after I clicked submit my comment didn’t appear. Grrrr… well I’m not writing all that over again. Regardless, just wanted to say wonderful blog!
Queenie Mccahill –
Hmm it looks like your site ate my first comment (it was extremely long) so I guess I’ll just sum it up what I wrote and say, I’m thoroughly enjoying your blog. I as well am an aspiring blog blogger but I’m still new to everything. Do you have any tips and hints for rookie blog writers? I’d really appreciate it.
Jim Polston –
It’s hard to come by knowledgeable people on this subject, but you sound like you know what you’re talking about! Thanks
Phil Danielski –
Aw, this was a very good post. Spending some time and actual effort to create a top notch article… but what can I say… I hesitate a whole lot and don’t seem to get nearly anything done.
Denna Hemsley –
I could not resist commenting. Exceptionally well written!
ciz –
Hi, this is Julia. I am sending you my intimate photos as I promised. https://tinyurl.com/yhv9j673
nem2404226flebno –
mys2404226rttyneg UNpaXiS 3lR2 a7fuWCF
DanielReips –
Best dating site: https://tinyurl.com/z5s523s2
qtV98Kw85JJpP0yQ7vL9B0P71JhIElNJ